Kawasaki Teryx Gen II/T4 Long Travel Suspension Kit - Moab Edition
Kawasaki Teryx Gen II/T4 Long Travel Suspension Kit - Moab Edition
by HCR racing
Couldn't load pickup availability
- Adds 5 inches of width per side
- Giving your TERYX a 72" width at the wheels
- Adds 3.5 inches in wheel base of
- 16 inches of suspension travel (stock is 8 inches of travel)
- 8 High Clearance Control Arms
- 4 HCR Spec King 2.0 Shocks with compression adjusters
- 4 RCV Extended axle bars
- 2 Tie-Rod Extensions
- Brake line mounting hardware
- See below for more details and specs
About This Product
HCR Suspension's Teryx Moab Long-Travel Suspension System
Compatible With 2nd Gen T-2 & T-4 Models (2012-CURRENT)
** DOES NOT FIT TERYX S MODELS
Part #: TER-05400
The Kawasaki Teryx Moab kit is the most sought after suspension system for the Teryx platforms as ride quality is improved to a new standard of comfort and control. This is due to the increase in numbers all around on the machine optimizing this kit; +5" per side is added making the TERYX 72" width at the wheels, then an increase wheel base of +3.5" and 16" of Suspension travel doubling stock travel! With these increases in number 28" tires can be used without any further components, but the increased wheelbase is designed to run Larger tires with use of the HCR Bed Lift kit to help eliminate bed rub in the rear Suspension area.
Contents of the Kit:
- 8 High Clearance Control Arms
- 4 HCR Spec King 2.0 Shocks with compression adjusters
- 4 RCV Extended axle bars
- 2 Tie-Rod Extensions
- Brake line mounting hardware
Why do you want this kit?
- Adds 5 inches of width per side
- Giving your TERYX a 72" width at the wheels
- Adds 3.5 inches in wheel base of
-
16 inches of suspension travel (stock is 8 inches of travel)
Kawasaki Teryx Gen II/T4 Long Travel Suspension Kit - Moab Edition Details
Fits
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, and 2022 Kawasaki Teryx and (fits 4)
Installation Instructions & Videos
Installing 8 High Clearance Control Arms, 4 HCR Spec King 2.0 Shocks with compression adjusters, 4 RCV Extended axle bars, 2 Tie-Rod Extensions, and Brake line mounting hardware requires careful attention to detail and the right tools.
To install these components, begin by lifting the vehicle and removing the wheels. Remove the old control arms, shocks, and axle bars. Install the new high clearance control arms, making sure to torque the bolts to the manufacturer's specifications. Install the new shocks with compression adjusters, adjusting the compression to your desired settings.
Next, install the RCV extended axle bars, being sure to align the splines correctly. Install the tie-rod extensions to ensure proper steering alignment. Finally, install the brake line mounting hardware to keep your brake lines secure and protected.
Once all components have been installed, lower the vehicle and test the suspension to ensure proper function and alignment. It is recommended to have a professional mechanic or technician perform this installation if you do not have experience working on suspension systems.